These are easy to make PVC weaves You can make them any length.
I used 4 Poles indoors and sets of 6 outdoors. If you don't glue them, you can slant them.
I found if I didn't glue them, they would be knocked apart.
My hard weavers moved them if I didn't stake them down, and if I staked them down he broke them.
Here is the Shopping list
| Item | Quantity |
| 3/4" PVC Tees | 8 |
| 3/4" Endcaps | 10 |
| 3/4" x 10' poles | 4 |
Step 1. Cut the PVC. (See PVC tips!)
| PVC Pieces | Quanity |
| 12" Sections | 6 |
| 18.5" Sections | 5 |
| 36" Sections | 6 |
Step 2. Put the ends together, using the 12" sections.
Step 3. Put the middle section together, using the 18.5" and 36" poles.. There is a Tee on each end.
If you are going to glue, I lay these down on the floor to get them even.
Step 3. Put the Ends on the Middle! Voila!